Back to blog

Cold email deliverability: how to stay out of the spam folder

Improve cold email deliverability with a secondary domain, SPF, DKIM, DMARC, a gradual warm-up and verified lists, so your B2B prospecting reaches the inbox.

Cold email deliverability: how to stay out of the spam folder

To keep your prospecting emails out of spam you need four things: a domain authenticated with SPF, DKIM and DMARC, a gradual warm-up before you send at volume, verified lists of contacts who genuinely fit your offer, and short, personal messages. Cold email deliverability is decided before you write the first email.

Why do prospecting emails end up in spam?

Gmail, Outlook and Yahoo do not read your email the way a person would: they decide where to place it based on the reputation of your domain and of the IP you send from. That reputation is built on very specific signals:

  • Authentication: whether the domain proves the email really comes from you.
  • Complaints: how many recipients click "Report spam".
  • Bounces: how many addresses on your list do not exist.
  • Sending pattern: whether your volume is steady or appears out of nowhere.

Google asks senders to keep their spam rate below 0.3% and recommends staying under 0.1%; Yahoo sets the same 0.3% limit. In other words, roughly three complaints per thousand emails already puts you in the risk zone.

Google also applies stricter requirements to anyone sending more than 5,000 messages a day, and Outlook has done the same since 5 May 2025: non-compliant mail goes to the Junk folder. An SME doing outreach sends far less, but the filters look at the same signals. The details are in Google's email sender guidelines.

What are SPF, DKIM and DMARC and how do you set them up?

They are three records added to your domain's DNS that let the recipient's server check that the email is legitimate:

  • SPF: the list of servers authorised to send on behalf of your domain.
  • DKIM: a digital signature proving the message has not been altered in transit. Google requires keys of at least 1,024 bits and recommends 2,048.
  • DMARC: tells receivers what to do with emails that fail SPF or DKIM and sends you reports. Google and Microsoft accept a p=none policy as a starting point.
  • Alignment: the domain shown in the From address must match the domain validated by SPF or by DKIM.

Google asks every sender for SPF or DKIM, however little they send, and all three records from large senders. Our recommendation is to set up all three from day one. This is done by whoever manages your domain or your email: your IT provider or your email service's admin panel.

To check it, send yourself a message to a Gmail account and open "Show original": you will see whether SPF, DKIM and DMARC are marked as passed. Use a real sender address that can receive replies, too: it is one of the points in Outlook's requirements for high-volume senders.

Should you use a secondary domain for outreach?

In most cases, yes. Reputation is calculated per domain, so if a campaign generates complaints on your main domain, your invoices, quotes and everyday email with customers may suffer as well. Yahoo recommends it explicitly: separate your mail streams by function, because each IP and each DKIM-signed domain has its own reputation.

To do it properly, follow these four steps:

  • Register a domain similar to your main one and recognisable as your brand.
  • Redirect it to your website so anyone who visits it knows who you are.
  • Set up SPF, DKIM and DMARC on it just as on your main domain.
  • Create mailboxes for real people, with first name, surname and a full signature.

A secondary domain protects your everyday email, but it will not fix a poor list or a weak message. And because it is new, it has no reputation: you have to build one.

How do you warm up a domain and how much should you send?

Warming up a domain means getting mailbox providers used to your activity before asking them to deliver a campaign. Google sums it up like this: start with low volume to recipients who engage with you and increase it slowly. Avoid spikes, because suddenly doubling your previous volume can lead to rate limiting or a drop in reputation.

In practice, warming up comes down to this:

  • For the first few weeks, use the new mailboxes for normal email with colleagues, customers and suppliers who will reply.
  • Increase sending little by little and keep a steady daily pace.
  • Spread the volume across several mailboxes instead of overloading one.
  • If bounces rise or messages are deferred, reduce volume and do not raise it again until things return to normal.

There is no official figure for "safe emails per day". What works is consistency: a well-planned campaign spreads its contacts over weeks, not over a single morning.

Verified lists and content: what matters most

Once the technical side is sorted, deliverability comes down to who you write to and what you say.

  • Verify addresses before sending. Every bounce is a sign of a neglected list.
  • Do not buy databases. Yahoo explicitly advises against it. Build the list around your ideal customer, as we explain in our guide to lead generation with AI.
  • Remove people quickly when they ask and delete bounced addresses. Yahoo asks senders to honour unsubscribes within two days.
  • Write short, plain-text emails, with no attachments or heavy images in the first contact and only a few links, visible and clear about where they lead.
  • Use an honest subject line. Google asks senders not to use "Re:" or "Fwd:" unless the message is a genuine reply or forward.
  • Personalise for real. Someone who receives a relevant message replies or ignores it, but does not mark it as spam.

Check the legal framework as well. In Spain, Article 21 of the LSSI prohibits commercial communications by email that have not been requested or expressly authorised, with an exception for existing customers, and every country has its own rules. Before launching a campaign, ask your legal adviser how this applies in each market.

If you want to work on the message itself, there is more detail in how to write a B2B cold email to importers.

How Vycte helps you

At Vycte we design and run multichannel B2B prospecting campaigns with AI: we define the ideal customer, prepare the contacts and look after deliverability from the very first send. A campaign needs a minimum of 3 months. If you would like to review how you are sending today, book a free 30-minute diagnostic call.

Frequently asked questions

How many prospecting emails can I send per day? There is no official figure that applies to everyone. Google recommends starting with low volume and increasing slowly, without spikes. The stricter requirements apply from 5,000 messages a day, but complaints and bounces hurt you at any volume.

Do I need DMARC if I send very few emails? Google requires SPF or DKIM from all senders and all three records from anyone exceeding 5,000 messages a day. Even so, it is worth setting up all three: a p=none policy is enough to start with and gives you reports on who is sending on behalf of your domain.

How do I know if my emails are landing in spam? The usual signs are a sharp drop in replies and a rise in bounces. Send tests to your own Gmail and Outlook mailboxes and, if you send enough volume to Gmail, check your spam rate and domain reputation in Google Postmaster Tools.

Shall we apply this to your company?

In 30 minutes we review the opportunities for your product in Spain and Europe and tell you where to start: target markets, lead generation or invoicing in Spain. Free and with no commitment.

Book your free diagnosisSee the service →

More articles

Want to sell in Spain and Europe?

In a 30-minute call we look at the opportunities for your product in Spain and Europe, the right sales channels and how to win your first clients. If you already operate in Spain, we also explain how to invoice compliantly with Holded. No commitment.

Book your free diagnosis

“Tarraconsulting International S.L. ha sido beneficiaria de Fondos Europeos, cuyo objetivo es la mejora de la competitividad de las PYMES, y gracias al cual ha puesto en marcha un Plan de Acción con el objetivo de reforzar la digitalización y la competitividad de las pymes durante el año 2026. Para ello ha contado con el apoyo del Programa Pyme Digital de la Cámara de Comercio de Tarragona.
#EuropaSeSiente”

Cofinanciado por la Unión Europea, Ministerio de Hacienda, Fondos Europeos y Cámara de Comercio de EspañaPrograma Pyme Digital de la Cámara de Comercio